SX1262 LoRaWAN/GNSS HAT
SX1262 RF Chip LoRa Module, Suitable For Sub-GHz Band Network
Features At A Glance
This series of products are LoRa modules using the new generation of SX1262 RF chip, with the features of long communication distance and strong anti-interference ability. Suitable for Sub-GHz frequency band network, and is available in LF (410~510MHz) or HF (850~930MHz) frequency band versions. Combined with a LoRa gateway, it can be connected to servers such as TTN to build a LoRaWAN network. In addition to the basic LoRaWAN version, it also provides optional GNSS positioning function with GPS/BD support.
Common features:
- Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi series boards
- The new generation SX1262 has higher power efficiency and longer transmission distance than the SX1278
- Suitable for Sub-GHz band, combined with the gateway, can be quickly connected to a cloud server such as TTN to build a LoRaWAN network
GNSS version features:
- Onboard L76K module with GPS/BD support, provides accurate clock and location info for node module
- Onboard button cell holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
- Onboard 4 LED indicators for module operating status
- Comes with online development resources and manual (example in C)
Version Option: SX1262 868/915M LoRaWAN/GNSS HAT
Suitable for HF band, comes with a magnetic CB antenna, a GPS antenna and IPEX adapter cables (2PCS)
Specifications
| LORA PARAMETERS | |
|---|---|
| RF CHIP | SX1262 |
| FREQUENCY BAND | LF: 410 ~ 510MHz HF: 850 ~ 930MHz |
| MODULATION | LoRa / (G)FSK |
| DATA RATE | LoRa: 0.018 ~ 62.5Kbps (G)FSK: 0.6 ~ 300Kbps |
| EMIT POWER | 22dBm@3.3V |
| SPREADING FACTOR | SF7 ~ SF12 |
| OPERATING VOLTAGE | 3.3V |
| MODULE CURRENT CONSUMPTION | emitting current: 107mA@22dBm receiving current: 5.3mA@125KHz |
| COMMUNICATION BUS | SPI |
| OPERATING TEMPERATURE | 0 ~ 50℃ |
| INTERFACE | 40PIN GPIO header |
| GNSS PARAMETERS | |
| GNSS MODULE | L76K |
| GNSS TYPE | GPS/GLONASS/BDS/QZSS |
| L1 BAND RECEIVER (CHANNELS) | 32 Tracking ch/72 Acquisition ch |
| A-GNSS | support |
| RECEIVING SENSITIVITY (ACQUISITION, RE-ACQUISITION, TRACKING) |
-148dBm, -160dBm, -162dBm |
| TTFF (TIME TO FIRST FIX) COLD STARTS |
30s, Autonomous 5.5s, With AGNSS |
| POSITION ACCURACY | 2.0m CEP |
| SPEED ACCURACY | 0.1m/s |
| ACCELERATION ACCURACY (MAX) | 0.1m/s² |
| UART RATE | Range: 4800~115200bps Default: 9600bps |
| GNSS DATA UPDATE RATE | Max: 5Hz Default: 1Hz |
Pinout Definition
What's On Board
-
SX1262
LoRa module -
L76K
GNSS module -
Power chip
5V to 3.3V LDO -
GPS STANDY mode ON/OFF
OFF: turn off STANDY and GPS works normally
ON: turn on STANDY, GPS stops outputting NMEA -
SET button
Press to wake up the GNSS module in sleep mode -
GNSS module IPEX 1 connector
L76K antenna connector -
LoRa module IPEX 1 connector
LoRa antenna connector -
Status Indicator
PWR: power indicator
RXD/TXD: UART RX/TX indicator
PPS: GPS status indicator -
Raspberry Pi 40PIN GPIO header
for connecting with Raspberry Pi series boards - LoRa module and GNSS module pin header
Application Examples
Industrial Control, Intelligent Home, And Data Acquisition...
Outline Dimensions
Package Contents:
SX1262 868/915M LoRaWAN/GNSS HAT
- SX1262 868/915M LoRaWAN/GNSS HAT x1
- 868/915M Magnetic CB antenna x1
- GPS antenna x1
- IPEX to SMA adapter cable ~17cm x2
- Screws pack x1
- 2×20PIN female pinheader x1
1
2
3
4
5
6
2
3
4
5
6
